Our products are 100% authentic. This set is the main body only. Or the main body, case, and Buttery charger. The plastic case included in this set of items is TD172, it can also be used with /TD171/ TD161 / TD170 / TD160 / TD147 / TD137 / TD136.
XDT01 / 04/06/08/09/11/12/12/13/14 / 15/16. Compatible with dustproof and waterproof protection class IP56. Space for Impact body, rechargeable battery × 4, charger, small items etc are entered such as bits.Upgrades from the TD171DZ can be smoother when inserting bits. The light turns on by pressing the start switch with the rotation changeover switch in the center (1 hour continuously). The part (anvil) where the bit is inserted is the same part as the 40V power tool, which improves durability. It is a very affordable set. The manual is in Japanese.
4 modes available in the scene. Lumber mode --- Start the trigger "slowly" with the trigger fully open, and tighten it at once with the automatic speed change "fastest". Bolt mode --- In forward rotation, the trigger turns on instantly at the fastest speed, and in reverse rotation, it automatically stops when the nut loosens.Text plate mode --- reduce skipping / missing screw heads. Thin sheet mode of text --- After penetrating the screw, it will detect the blow and stop automatically.
--- The trigger starts to close slowly and fully open, then becomes the fastest at once. Use automatic gearshifting to reduce screw tilt and pullout at the start of tightening. You can handle the strength of the trigger automatically. Strike mode 4 step change. You can freely switch between the fastest / strong / medium / weak.
Leave the force, speed, and preferential tightening to a delicate screwdriver such as a small screw. Switching of hit mode possible at hand. In the conventional model, you can not change the hit mode unless you press the button on the panel section, but in this model you can switch with the button at hand with the grip. You can register one mode you use frequently.Select your favorite mode and register at the same time by pressing the button at hand and the batting button. Switch the mode you used and the registered mode quickly by pressing the hand button! Visibility is greatly improved with left and right lights. By attaching lights on both sides of the impact, visibility is greatly improved, making it difficult for shadows such as bits and screws to be formed. Maximum tightening torque 180 Nm. Assisting more work "Rakuten 4 modes" loaded. A variety of modes to choose from in the scene. Reduce bit blurring "zero blur". Two left and right LED lights included. Short body overall length 114 mm. Maximum tightening torque:180 Nm. Fastest: 0 to 3600 min - 1 (revolutions per minute). Strong: 0 - 3200 min - 1 (rotation / min). Medium: 0 to 2100 min-1 (rotation / min). Weak: 0 - 1100 min - 1 (rotation / min). Wood: 0 - 1800 min - 1 (revolutions per minute).
Volt: 0 to 3600 min - 1 (rotation / min). Tex sheet: 0 to 2900 min - 1 (rotation / min). Text thick plate: 0 3600 min - 1 (rotation / min).
Fastest: 0 - 3800 min - 1 (revolutions per minute). Strong: 0 - 3600 min - 1 (times / min).
Medium: 0 - 2600 min - 1 (times / min). Weak: 0 - 1100 min - 1 (times / min). Wood: 0 - 3800 min - 1 (revolutions per minute). Bolt: 0 to 3800 minutes-1 (revolutions per minute).Thin sheet: Stops immediately after hitting. Text plate: 0-2600 minutes-1 (rotation / minute). We will change it if it is possible. International Buyers - Please Note.
·We do not mark merchandise values below value or mark items as gifts US and International government regulations prohibit such behavior. This item is in the category "Home & Garden\Tools & Workshop Equipment\Power Tools\Impact Drivers". The seller is "bankane-japan-carpenters-shop" and is located in this country: JP.
This item can be shipped worldwide.